WITTMANN BATTENFELD with high-tech machines and processes at the Interplastica in Moscow
| Subj: Machinery
From 23 to 26 January 2018, WITTMANN BATTENFELD will demonstrate latest injection molding technology including automation and peripheral equipment to interested trade visitors at the Interplastica in Moscow in hall 02, booth 21A23.
At this year’s Interplastica, WITTMANN BATTENFELD is showcasing two electric machines from its proven PowerSeries, an all-electric EcoPower and a MicroPower specially designed for injection molding of micro parts.
On an EcoPower 160/750, a coat hanger will be manufactured with a single-cavity mold from Haidlmair, Austria, using the WITTMANN BATTENFELD AIRMOULD® internal gas pressure process. The machine comes with an insider cell, which means that a robot and a conveyor belt as well as peripherals for upstream and downstream processing are all integrated in the machine’s cell, which results in a number of advantages for users. For example, parts removal and depositing by the robot can be realized with minimal space requirements on the non-operator side. Along with the automation system and the peripheral equipment, the AIRMOULD® interface is also integrated in the machine’s new UNILOG B8 control system. The combined compressor and nitrogen generator unit used has been developed and manufactured by WITTMANN BATTENFELD. The parts will be removed and deposited on the conveyor belt integrated in the production cell by a W918 robot from WITTMANN with the new R9 robot control system.
A machine from the MicroPower series will be exhibited at the Interplastica as well. This machine series stands out primarily by extreme cost efficiency, high speed and process reliability. Via a two-step screw-and-plunger injection unit, thermally homogeneous melt is injected with shot volumes ranging from 0.05 to 4 cm³. This makes it possible to manufacture top-quality parts in an absolutely stable production process and with short cycle times. At the Interplastica, WITTMANN BATTENFELD will demonstrate the production of a POM paper clip weighing just 0.27 g on a MicroPower 15/10 with a 6-cavity mold supplied by Microsystems UK.
Furthermore, the integration of robots and peripherals into the new UNILOG B8 machine control system, known as WITTMANN 4.0, will be clearly shown in an easy-to-understand demonstration on an interactive display panel, giving visitors an opportunity to test the advantages of the Industry 4.0 solution from WITTMANN for themselves. It will visualize the complete integration into the UNILOG B8 machine control system of WITTMANN temperature controllers from the TEMPRO plus D series, the intelligent FLOWCON plus flow controller, a robot from the control system generations R8 and/or R9, the GRAVIMAX G gravimetric blender and, most recently, also of dryers from WITTMANN’s ATON plus series. All parameters for a mold, that is all settings required on the machine, plus various temperatures and formulations for the peripherals, as well as the robot teach program, can be administered centrally without much effort. Another major advantage is the possibility to have the visualization of the control systems of all WITTMANN 4.0-compatible peripherals and of the robot displayed on the B8 screen in their original form. This enables the operator to switch easily and efficiently between the various appliances connected to the machine.
In addition to the machines from the PowerSeries, numerous peripheral appliances from WITTMANN will be showcased as stand-alone solutions at the Interplastica in Moscow.
Source: WITTMANN BATTENFELD